What is the best skimmer market?

Skimmer It is the common name of a device indispensable in an aquarium filtration saltwater. The correct translation would be, urea separator or separator proteins,Ã, although also they are known as the skimmers, because that's what they do, create foam in protein trapping. In any case, is an essential ally in removing impurities from the water in a marine aquarium. The Marine fish They are very sensitive to pollution and disease, for that reason it is important to use the skimmer to remove most of the waste produced in a marine aquarium. As with all the accessories of an aquarium, There are different levels of effectiveness. If you want to know what is the best skimmer market, informing follows in this article.

Best comparative protein separators 2020

What skimmer buy? Best Value urea separator

Comline DOC Skimmer

characteristics

Sera Marin PS 200

characteristics

Reviews of purchasers of the sera marin skimmer PS 200

Skimmer Boyu DG-2516

characteristics

Reviews from buyers of the DG-2516 Skimmer Boyu

Sera Marin PS 400

characteristics

Skimmer Aqua Medic EVO 3000

characteristics

Other skimmers that may be of interest

For obvious limits, I've only chosen 5 protein skimmers for marine aquarium, but there are many more. These are now the best sellers:

What is a Skimmer?

When you walk along the shore of the sea, You see how the waves breaking against the shore leave a foam. This foam is produced by the agitation of the sea. A reach the shore the surfactants present in the water by decomposing organic matter (proteins, lignins and lipids), along with the air particles that the sea catches, produce that foam. The foam removes organic wastes from the sea, Skimmer and is a device that recreates this process puree.

How does a Skimmer?

In the aquarium can not be reproduced waves, but yes the process by which water is combined with the air traps and toxic elements (mainly nitrates) containing, to be eliminated easily. That is the function of the Skimmer, produce a water stream therein, to which air and creates foam injected. The foam goes to the glass collector, where it transforms back into a thick fluid and yellowish, similar to the urine for its high content organic waste and its odor. This is the reason why the Skimmers they are called urea separator, proteínasí separators or skimmers.

How often do you clean a Skimmer?

The glass of the skimmer should be cleaned every week. Once empty repositioned and ready. Depending on the tamaà ± or our aquarium, this process must realize between 1 Y 4 times a week. Each 4 a 6 months, It must be submitted to the Skimmer to deep clean, to eliminate all kinds of organisms calcareous and coralline algae that may be growing inside, and can influence their proper operation. Skimmers do not distinguish between substances that collect. If we corals in the aquarium, Skimmer removes the need for development oligoelentos, so that we must regularly add aà ±.

Skimmer or parts of a frother

There are two types of Skimmer, which inject air through a compressor to a diffuser block, and injecting air and water through a pump or rotor needle. The latter are currently marketed, and about which I will talk to you about in this article. Elements are the Skimmer:

Operation is simple. The pump introduces a current through the body of the skimmer, thanks to the Venturi effect, which is just sucking air outside, creating a fusion occurs million bubbles, to be directed to the reactor where the Skimmer foam occurs, then be collected in the vessel. Water aquarium in and out steadily from the Skimmer, so that the cleaning process is continuously repeated. The ability of the foamer is determined by the amount of water that is able to clean, and is measured in liters / hour. Manufactured different types of models depending on their location, and its filtering capacity. There Skimmer for all types of tamaà ± os aquarium.

Where you place the Skimmer?

The location of the Skimmer for proper operation is not decisive, We can place it wherever you want, to the side of the aquarium, below, etc. The problem is that your diseà± or is horrible, and it's not very aesthetically pleasing place to the side, not to mention the noise they make. There are different options for placement. If we have space and a cabinet under the aquarium, this is its excellent location. It goes unnoticed and noise is quite limited. Another option is to create an auxiliary tank, called sump or sink, you can go behind or under the main aquarium, causing water to flow from the tank to the pump and skimmer by desagües. Fortunately we can choose between Skimmer external and internal, so that can be placed inside the aquarium, in a corner, after decoration or in a little seen. The same thing happens with internal filters aquarium, remaining capacity, but they are a perfect solution when there is no choice.

Skimmer area

In the market also they sell what are called à ¢ â,¬Â "Skimmers the superficieà â,¬Â ¢ ??, which can mislead. The Skimmer surface have nothing to do with a traditional Skimmer. Its mission is to prevent a greasy film is formed on the surface of the aquarium, which prevents proper oxygenation of the aquarium, and the opposite happens with traditional Simmers that are only used in marine aquariums, These are used for all kinds of aquariums.

More ideas about aquarium filters

You could also be interested in ...